This is a list of the tools that I use and what works for me. Most of these tools I did not have to start out with, but are tools that I have built up to over time. I will modify this list as I add new tools to the shop!
Most of the links to items are affiliate links and by purchasing anything using these links you will help support me and my workshop! It doesn’t cost you any extra, but helps me out!
Affiliate links are used on this page. See my disclosure page for info on affiliate programs.
Featured Tools
Diablo 80 tooth Crosscut Blade – A seriously nice blade! Especially for the money.
Dust Collection/Air Quality
- Dust Deputy DIY
- Eagle America 14 Gallon Drum
- 12 Gallon Shop Vac SVX2
- WEN 3410 3-speed 400 CFM Air Filtration System
Clamps
- Pipe Clamps – Bessey 3/4″ H-Style
- Parallel Clamps – Bessey KRE3524 REVOlution 24″
- F-Style – Bessey 12″, 24″, 36″; Harbor Freight; Masterforce
- Microjig Matchfit dovetail clamps
- Various spring clamps
- Face Clamp – Kreg 2″
Glue & Finishing
- Wood Glue – Titebond II & III
- CA Glue – Starbond Kit
- Spray Lacquer – Deft Semi-Gloss
- General Finishes Arm-R-Seal – Semi-Gloss
- Stains – Varathane
- Finish Sprayer – Graco TrueCoat 360
Large Power Tools
- Table Saw – Delta 36-725
- Band Saw – WEN 3962 10″
- Miter Saw – Delta Cruzer 10″ 26-2241
- Air Compressor – Harbor Freight 8-gallon
Cordless Power Tools
- Ryobi ONE+ P251 Brushless Hammer Drill
- Ryobi ONE+ P238 Brushless Impact Driver
- Ryobi ONE+ P320 18GA Brad Nailer
- Ryobi ONE+ Brushless P517 Reciprocating Saw
- Ryobi ONE+ P601 Trim Router
- Ryobi ONE+ Brushless Jigsaw P524
- Ryobi ONE+ P411 Random Orbit Sander
- Ryobi ONE+ P401 Corner Cat Detail Sander
- Ryobi ONE+ High-Pressure Inflator P737
- Ryobi ONE+ High-Volume Inflator P738
- Ryobi ONE+ Hybrid Fan P3320
- Ryobi ONE+ Hybrid Work Light P721
- Ryobi ONE+ Hybrid Project Light P790
- Ryobi ONE+ Supercharger P135
- Ryobi ONE+ Lithium+ HP 3Ah batteries
- Ryobi ONE+ Lithium+ HP 4Ah batteries
- Ryobi 12v Drill/Driver
- Craftsman Nextec 12v Drill/ Driver
Corded Power Tools
- Random Orbit Sander – DeWalt DWE6421 5″
- Portable Belt Sander – Craftsman 3″ x 18″
- Trim Router – Performax 3.8A; Drill Master 2.4A
- Full Size/Table Router – Bosch 1617EVSPK Kit
Benchtop Power Tools
Hand Tools
- Chisels – Narex Profi & Irwin Marples
- Block Plane – Stanley 12-960 Low-Angle
- Bench Plane – Bench Dog Tools #4
- Card Scrapers – DFM Card Scrapers
Workshop Accessories
- Respirator – 3M 7500 Series
- Respirator Filters – 3M 2291
- Hearing Protection – FNova NRR 34
- Pocket Hole Jig – Kreg R3 & K4
- Sanding Block – 5″ Hook and Loop
- Dado Stack – Oshlun 6″
- Rip Blade – Freud Thin-Kerf Rip
- Heavy-Duty Rip Blade – CMT 24T Full-Kerf Rip
- Glue-Line Rip Blade – Freud Thin Kerf Glue-Line Rip
- Cross Cut Blade – Diablo 60 tooth
- Miter Saw Blade – Diablo 80 tooth
- Glue Bottle – FastCap GluBot
- Pallet Nail Remover – AirLocker ap700
- Push Block – MicroJig GRR-Ripper
- Feather Board – The Feather Pro